CZPT clamop
Beam Clamp is a gear that can quick kind hanger or connecting position in I-beam monorail.
The beam clamp need to be formed a complete set with chain hoist or other lifting equipment.
The beam clamp was installed on the base flange of I-beam.
The beam clamp is adopt still left and proper screw thread design for major-screw.
The scops of adjustments is wide,adjustment is really practical.
Primary areas of assist toughness are produced by alloy steel.
Made for construction,industrial and industrial vertical or horizontal rigging functions.
Clamp jaw is created to decrease flange tension by distributing load absent from I-BEAM flange edge.
Adjusts with ease to fit a wide range of broad-flange H or common I beams.
Constructed-in suspension rod supplies reduced headroom.
Mount hoist or raise beams with moveable gentle excess weight clamp.strong all-steel design with basic safety operation.compact size with gentle,effortless to set up with minimum headroom,tremendous rapid adjustment to any girder width in selection. CZPT:EN13157
| model | DL-1000A | DL-2000A | DL-3000A | DL-5000A | DL-10000A | |
| potential | KG | 1000KG | 2000KG | 3000KG | 5000KG | 10000KG |
| beam width | MM | 75-230 | seventy five-230 | eighty-320 | 90-320 | ninety-320 |
| n.w | KG | 3.85 | five | 9 | 11 | 18 |
| gmw | KG | four | 5.two | nine.3 | 11.four | eighteen.5 |
| packing(L*W*H) | cm | 30.6*7.seven*24 | thirty.6*8.8*24 | 38.5*11.two*32.seven | 38.five*14.four*32.seven | 38.5*thirteen.eight*forty one |
| Proportions | A | 75-230 | seventy five-230 | 80-320 | 90-320 | ninety-320 |
| B | 180-375 | 180-375 | 220-498 | 220-498 | 250-514 | |
| C | eighty | ninety | 117 | 127 | 139 | |
| D | 220 | 220 | 271 | 271 | 271 | |
| E | four | six | eight | ten | twelve | |
| F | sixty one.six | 73.6 | ninety five.six | 107.six | 115.six | |
| G | seventeen | 20 | 24 | 27 | 36 | |
| H | 25 | twenty five | 30 | 35 | 40 | |
| M | 45 | 49 | sixty three | sixty seven | 67 |
